News

How to install Tipped grass blade

How to install the lawn mower to replace the grass head with a Tipped grass blade? Come and find out today.

Release Time:

2022-12-26 14:56

How to install the lawn mower to replace the grass head with a Tipped grass blade? Come and find out today.

Wholesale Tipped grass blade factory
1. When replacing the Tipped grass blade, first take a positioning rod, align the small metal cover on the cutter head with the positioning hole inside, and then insert the positioning rod.
2. There is a larger nut under the blade. This nut is used to fix the blade. After fixing the cutter head of the weeder, you can use a wrench that matches the cutter head nut to screw the cutter head Below this setscrew.
3. When the screw that fixes the cutter head is unscrewed, the metal cover under the screw can also be removed.
4. After the metal cover is removed, you can see that there is a metal gasket underneath, and then remove the thicker metal gasket. When the above parts are removed, the Tipped grass blade can be successfully removed.
5. Then, put the blade to be replaced on the main shaft, and then put back the parts that fasten the cutter head that have just been removed one by one in reverse order, and finally tighten the screws, so that the cutter head of the lawn mower It was replaced. Hope it can help you.
I hope my answer is helpful to you. Finally, the Tipped grass blade manufacturer wishes you good health and a happy mood again!

RICHOICE Catalogue

If you do not have a comprehensive understanding of our products, we have uploaded relevant technical documents for you to download and reference so that you can better understand our product usage and technical parameters

View More
Richoice