selection of tooth profile for oscillating multitool quick release carbide saw blade
The manufacturer of oscillating multitool quick release carbide saw blade tells you that the commonly used tooth shapes include left and right teeth (alternate teeth), flat teeth, ladder flat teeth (high and low teeth), inverted trapezoidal teeth (inverted tapered teeth).
Release Time:
2023-02-06 09:34
The manufacturer of oscillating multitool quick release carbide saw blade tells you that the commonly used tooth shapes include left and right teeth (alternate teeth), flat teeth, ladder flat teeth (high and low teeth), inverted trapezoidal teeth (inverted tapered teeth), dovetail teeth (hump teeth), And the rare industrial grade three left and one right, left and right flat teeth and so on.
1. The left and right teeth are the most widely used, with fast cutting speed and relatively simple grinding. The oscillating multitool quick release carbide saw blade manufacturer tells you that it is suitable for cutting and cross-sawing various soft and hard solid wood profiles and density boards, multi-layer boards, particle boards, etc. The left and right teeth equipped with anti-rebound protection teeth are dovetail teeth, which are suitable for longitudinal cutting of various boards with tree knots; the left and right teeth saw blades with negative rake angles are usually used for pasting due to their sharp teeth and good cutting quality. Sawing of panels.
2. The flat tooth saw edge is rough, the cutting speed is slow, and the grinding is the easiest. The manufacturer of oscillating multitool quick release carbide saw blade tells you that it is mainly used for sawing ordinary wood, the cost is low, and it is mostly used for aluminum saw blades with smaller diameters to reduce sticking during cutting, or for slotting saw blades to maintain The bottom of the tank is flat.
3. The ladder flat tooth is a combination of trapezoidal tooth and flat tooth. It is more complicated to repair and grind. It can reduce the cracking of the veneer during sawing. It is suitable for sawing various single and double veneer wood-based panels and fire-resistant panels. In order to prevent adhesion, saw blades for aluminum also use saw blades with more teeth with stepped flat teeth.
4. Inverted ladder teeth are often used in panel saw bottom groove saw blades. The oscillating multitool quick release carbide saw blade manufacturer tells you that when sawing double-veneer wood-based panels, the groove saw adjusts the thickness to complete the groove on the bottom surface, and then The main saw completes the sawing process of the plate to prevent chipping of the saw edge.
Latest News
RICHOICE Catalogue
If you do not have a comprehensive understanding of our products, we have uploaded relevant technical documents for you to download and reference so that you can better understand our product usage and technical parameters
View More
Add official WeChat
Chat with me now
Contact Us
+86 511 85891166 , +86 137 0528 3249
NO.66 Runxing Road, Runzhou Private Economy Development Zone, Zhenjiang, China
Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
